HP XP P9500 Storage User Manual
Page 528
Attributes
Type . . . . . . . . DKC (DKC/CU)
SHR . . . . . . . . Y (Y/N)
Supported action: s(Select Storage System)
AC S/N Model IFType PathID CU SSID CCA
S Primary
Secondary
Supported action: e(Edit physical path)
AC Assigned Physical Path
Forward
Reverse
F1=Help F3=Exit F7=Backward F8=Forward F12=Cancel
The serial numbers of the scanned storage systems display in the Select Storage System panel.
6.
Specify s in the AC column of the storage system serial number (14002).
Select Storage System Row 1 to 2 of 2
Command ===>
Scroll ===> PAGE
2008/02/28 16:04:17
Supported action: s(Select)
AC S/N Device Address Domain ID ---
S 14002 SF
14001 LA
******************************* Bottom of data ********************************
F1=Help F3=Exit F7=Backward F8=Forward F12=Cancel
7.
Press the Enter key.
You are returned to the Edit Logical Path Definition panel. The values are displayed in the
S/N, Model, IFType, and PathID columns of this panel.
If the storage system is a XP P9500 storage system, to change a value in the PathID column
to a value other than 00, specify the value.
Edit Logical Path Definition
Command ===>
2008/02/28 16:03:38
Path Set ID . . . : TESTPATH
Description . . . : TEST
Attributes
Type . . . . . . . . DKC (DKC/CU)
SHR . . . . . . . . Y (Y/N)
Supported action: s(Select Storage System)
AC S/N Model IFType PathID CU SSID CCA
Primary 14002
USP
1515
00
Secondary
Supported action: e(Edit physical path)
AC Assigned Physical Path
Forward
Reverse
F1=Help F3=Exit F7=Backward F8=Forward F12=Cancel
If the storage system in the primary site is directly connected to the host, you can enter the CU
and CCA to specify a device to which I/Os are issued during operation on a path.
528 Using the ISPF panels