HP XP P9500 Storage - Manual (Page 536)

2008/02/28 16:45:12
Supported action: s(Select)
AC CU SSID
s 00 2340
******************************* Bottom of data ********************************
F1=Help F3=Exit F7=Backward F8=Forward F12=Cancel
You are returned to the Edit Logical Path Definition panel. The values are now displayed in
the S/N, Model, IFType, CU, SSID, and CCA columns of this panel.
If the secondary site volumes have not been scanned yet, since the secondary site device
information cannot be selected in the Select Storage System panel and the Select SSID panel,
in the Edit Logical Path Definition panel, specify the following items in the Secondary line:
•
S/N
•
Model
•
IFType
•
CU
•
SSID
•
CCA
If the secondary site volumes have been scanned, perform steps 12 through 16.
12. Specify s in the AC column on the Secondary line.
Edit Logical Path Definition
Command ===>
2008/02/28 16:03:38
Path Set ID . . . : TESTPATH
Description . . . : TEST
Attributes
Type . . . . . . . . CU (DKC/CU)
SHR . . . . . . . . Y (Y/N)
Supported action: s(Select Storage System)
AC S/N Model IFType PathID CU SSID CCA
Primary 14002 USP 1515 00 2340 1F
S Secondary
Supported action: e(Edit physical path)
AC Assigned Physical Path
Forward
Reverse
F1=Help F3=Exit F7=Backward F8=Forward F12=Cancel
13. Press the Enter key.
The serial numbers of the scanned storage systems display in the Select Storage System panel.
14. Specify s in the AC column for the storage system serial number (14001).
Select Storage System Row 1 to 2 of 2
Command ===>
Scroll ===> PAGE
2008/02/28 16:04:17
Supported action: s(Select)
AC S/N Device Address Domain ID ---
14002 SF
536 Using the ISPF panels