Switch data window, Table 9 switch data window entries, 9 switch data window entries – HP M-series HA-Fabric Manager Software User Manual
Page 71: Switch, Data window
McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide
71
Switch data window
The Switch data window displays current network and switch information for the selected switches. See
”
” on page 78 for more information about the Switch data window.
describes
the Switch data window entries.
To open the Switch data window, choose one of the following:
•
Select one or more switches in the topology display. Click the
Switch data window tab.
•
Open the faceplate display. Click the
Switch data window tab.
Table 9
Switch data window entries
Entry
Description
First Port Address
Switch FC address
World Wide Name
Switch World Wide Name
Serial Number
Number assigned to each chassis (required for PFE keys)
Reason for Status
Additional status information
User Name
Account name
Login Level
Authority level
Super User
Super user privileges enabled/disabled
UserAuthentication Enabled
Enforcement of account names and authority (always True)
Vendor
Switch manufacturer
Firmware Version
Active firmware version
Inactive Firmware Version
Not applicable
Pending Firmware Version
Firmware version that will be activated at the next reset
PROM/Boot Version
PROM boot version
MAC Address
Media Access Control address
IP Address
Internet Protocol address
Subnet Mask
Mask that determines the IP address subnet
Gateway
Gateway address
SNMP Enabled
SNMP enabled or disabled
Negotiated Domain ID
The domain ID currently being used by the fabric
Configured Domain ID
The domain ID defined by network administrator
Domain ID Lock
Domain ID lock status. Prevents (True) or permits
(False—Default) dynamic domain ID reassignment
Number of Ports
Number of ports activated on the switch
Operational State
Switch operational state: online, offline, diagnostic, down
Administrative State
Current switch administrative state
Configured Admin State
Switch administrative state that is stored in the switch
configuration
R_A_TOV
Resource allocation timeout value
E_D_TOV
Error detect timeout value