HP M-series HA-Fabric Manager Software - Manual (Page 208)

208 Command Line Interface
Zone command
Description Manages zones and zone membership on a switch.
Authority Admin session and a Zoning Edit session. See the Zoning command for information about starting
a Zoning Edit session. The List, Members, and Zonesets operands are available without an Admin
session.
Syntax
zone
add [zone] [member_list]
copy [zone_source] [zone_destination]
create [zone]
delete [zone]
list
members [zone]
remove [zone] [member_list]
rename [zone_old [zone_new]
type [zone] [zone_type]
zonesets [zone]
Operands
add [zone] [member_list]
Specifies one or more ports/devices given by [members] to add to the zone named [zone]. Use
a to delimit ports/devices in [member_list]. A zone can have a maximum of 2047
members. [member_list] can have any of the following formats:
• Domain ID and port number pair (Domain ID, Port Number). Domain IDs can be 1–31 in
McDATA Fabric mode or 97–127 in Standard mode; port numbers can be 0–255.
• 16-character hexadecimal world wide port name (WWPN) with the format
xx:xx:xx:xx:xx:xx:xx:xx.
The application verifies that the [members] format is correct, but does not validate that such a
member exists.
copy [zone_source] [zone_destination]
Creates a new zone named [zone_destination] and copies the membership into it from the zone
given by [zone_source].
create [zone]
Creates a zone with the name given by [zone]. A zone name must begin with a letter and be no
longer than 64 characters. Valid characters are 0—9, A—Z, a—z, _, $, ^, and -. The zoning
database supports a maximum of 2047 zones.
delete [zone]
Deletes the specified zone given by [zone] from the zoning database. If the zone is a component
of the active zone set, the zone will not be removed from the active zone set until the active zone
set is deactivated.
list
Displays a list of all zones and the zone sets of which they are components. This operand does
not require an Admin session.
members [zone]
Displays all members of the zone given by [zone]. This operand does not require an Admin
session.