HP M-series HA-Fabric Manager Software - Manual (Page 73)

McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 73
FDMI HBA Entry Limit Maximum number of HBAs that can be registered with a
switch.
FDMI Enable Fabric Device Management Interface status. If enabled,
device information can be obtained, managed, and saved
through the fabric using Name Service Management Server
functions. The switch data window reports any and all FDMI
information reported by the entry switch, if FDMI is enabled
on the entry switch. See ”
Displaying detailed device
information ” on page 50 for information about displaying
FDMI information.
Embedded GUI McDATA Web Server and McDATA Element Manager
status. Enables or disables the web server on the switch.
Inactivity Timeout Number of minutes the switch waits before terminating an
idle CLI session. Zero (0) disables the time out threshold.
GUI Mgmt Enabled Switch management application status. If disabled, the
switch cannot be managed using the application.
Telnet Enabled Telnet client status
SSH Enabled Secure Shell status. If enabled, an encrypted data path is
provided for CLI sessions.
SSL Enabled Secure Sockets Layer status. If enabled, encryption for switch
management application and CIM sessions is provided.
CIM Enabled Common Information Model status. The CIM agent is based
on the SNIA Storage Management Initiative Specification
(SMI-S), which is the standard for SAN management in a
heterogeneous environment.
FTP Enabled FTP status
Management Server
Enabled Management server status
Table 9
Switch data window entries (continued)
Entry Description