HP M-series HA-Fabric Manager Software - Manual (Page 211)

McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 211
Zoneset command
Description Manages zone sets and component zones across the fabric.
Authority Admin session and a Zoning Edit session. See the Zoning command for information about starting
a Zoning Edit session. The Active, List, and Zones operands are available without an Admin session.
You must close the Zoning Edit session before using the Activate and Deactivate operands.
Syntax
zoneset
activate [zone_set]
active
add [zone_set] [zone_list]
copy [zone_set_source] [zone_set_destination]
create [zone_set]
deactivate
delete [zone_set]
list
remove [zone_set] [zone_list]
rename [zone_set_old] [zone_set_new]
zones [zone_set]
Operands
activate [zone_set]
Activates the zone set given by [zone_set]. This operand deactivates the active zone set. End the
Zoning Edit session before using this operand.
active
Displays the name of the active zone set. This operand does not require Admin session.
add [zone_set] [zone_list]
Adds a list of zones given by [zone_list] to the zone set given by [zone_set]. Use a to
delimit zone names in [zone_list].
copy [zone_set_source] [zone_set_destination]
Not applicable.
create [zone_set]
Creates the zone set with the name given by [zone_set]. A zone set name must begin with a letter
and be no longer than 64 characters. Valid characters are 0—9, A—Z, a—z, _, $, ^, and -. The
zoning database supports only one zone set.
deactivate
Deactivates the active zone set. End the Zoning Edit session before using this operand.
delete [zone_set]
Deletes the zone set given by [zone_set]. You must deactivate the active zone set before you can
delete it.
list
Displays a list of all zone sets. This operand does not require an Admin session.
remove [zone_set] [zone_list]
Removes a list of zones given by [zone_list] from the zone set given by [zone_set]. Use a
to delimit zone names in [zone_list]. If [zone_set] is the active zone set, the zone will
not be removed until the zone set has been deactivated.
rename [zone_set_old] [zone_set_new]
Renames the zone set given by [zone_set_old] to the name given by [zone_set_new]. You can
rename the active zone set.
zones [zone_set]
Displays all zones that are components of the zone set given by [zone_set]. This operand does
not require an Admin session.