beautypg.com

HP M-series HA-Fabric Manager Software User Manual

Page 161

background image

McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 161

PrincipalPriority

The priority used in the FC-SW-2 principal switch selection algorithm. 1 is
high, 255 is low. The default is 254.

ConfigDescription

Switch configuration description. The configuration description can be
up to 32 characters excluding #, semicolon (;), and comma (,). The
default is Default Config.

InteropMode

Interoperability mode. Choose from the following:

Use Standard to connect to FC-SW-2 compliant switches including
McDATA switches in Open Fabric Mode. This is the default.

Use the McDATA Fabric Mode to connect to McDATA switches in
McDATA Fabric Mode.

Table 46

Set Config switch parameters (continued)

Parameter

Description

This manual is related to the following products: