HP M-series HA-Fabric Manager Software - Manual (Page 209)

McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 209
remove [zone] [member_list]
Removes the ports/devices given by [member_list] from the zone given by [zone]. Use a
to delimit ports/devices in [member_list]. [member_list] can have any of the following
formats:
• Domain ID and port number pair (Domain ID, Port Number). Domain IDs can be 1–31 in
McDATA Fabric mode or 97–127 in Standard mode; port numbers can be 0–-255.
• 16-character hexadecimal world wide port name (WWPN) with the format
xx:xx:xx:xx:xx:xx:xx:xx.
rename [zone_old] [zone_new]
Renames the zone given by [zone_old] to the zone given by [zone_new].
type [zone] [zone_type]
Specifies the zone type given by [zone_type] to be assigned to the zone name given by [zone]. If
you omit the [zone_type], the system displays the zone type for the zone given by [zone].
[zone_type] can only be the following type:
soft
Name server zone
zonesets [zone]
Displays all zone sets of which the zone given by [zone] is a component. This operand does not
require an Admin session.
Examples The following is an example of the Zone List command:
McDATA4GbSAN #> zone list
Zone ZoneSet
-------------------
wwn_b0241f
zone_set_1
wwn_23bd31
zone_set_1
wwn_221416
zone_set_1
wwn_2215c3
zone_set_1
wwn_0160ed
zone_set_1
wwn_c001b0
zone_set_1
wwn_401248
zone_set_1
wwn_02402f
zone_set_1
wwn_22412f
zone_set_1