HP M-series HA-Fabric Manager Software - Manual (Page 190)

190 Command Line Interface
Show Config command
Description Displays switch, port, alarm threshold, security, and zoning for the current configuration.
Authority None
Syntax
show config
port [port_number]
security
switch
threshold
zoning
Operands
port [port_number]
Displays configuration parameters for the port number given by [port_number]. External ports are
numbered 0 and 9; internal ports are numbered 1–8. If [port_number] is omitted, all ports are
specified.
security
Displays the security database Autosave parameter value.
switch
Displays configuration parameters for the switch.
threshold
Displays alarm threshold parameters for the switch.
zoning
Displays zoning configuration parameters for the switch.
Examples The following is an example of the Show Config Port command:
McDATA4GbSAN #> show config port 9
Configuration Name: default
-------------------
Port Number: 9
------------
AdminState Online
LinkSpeed Auto
PortType GL
SymbolicName Port9
ALFairness False
DeviceScanEnabled True
ForceOfflineRSCN False
ARB_FF False
InteropCredit 0
FANEnabled True
AutoPerfTuning True
MSEnabled True
NoClose False
PDISCPingEnabled True
MSEnabled True
NoClose False
PDISCPingEnabled True