HP M-series HA-Fabric Manager Software - Manual (Page 84)

84 Managing switches
• CIM—Common Information Model. Allows management of the switch through third-party applications
that use CIM.
• FTP—File Transfer Protocol. Allows file transfers to the switch via FTP. FTP is required for out-of-band
firmware uploads which will complete faster than in-band firmware uploads.
• Management Server—Allows management of the switch through third-party applications that use GS-3
Management Server.
Security Consistency Checklist dialog
The Security Consistency Checklist dialog enables you to compare security-related features on switches in
order to check for inconsistencies. Any changes must be made through the appropriate dialog, such as
Network Properties dialog, Switch Properties dialog, or SNMP Properties dialog. Select
Switch > Security
Consistency Checklist to open the Security Consistency Checklist dialog from the faceplate display.
Network properties
Use the Network Properties dialog shown in Figure 40 to change IP configuration parameters and enable
remote logging.
To open the Network Properties dialog, choose one of the following:
• Select a switch in the topology display. Select Switch > Network Properties.
• Open the faceplate display. Select Switch > Network Properties.
Click OK to put any new values into effect.
Figure 40 Network Properties dialog