HP M-series HA-Fabric Manager Software - Manual (Page 200)

200 Command Line Interface
The following is an example of the Show Setup System command:
McDATA4GbSAN #> show setup system
System Information
------------------
Eth0NetworkDiscovery Static
Eth0NetworkAddress 10.20.92.246
Eth0NetworkMask 255.255.255.0
Eth0GatewayAddress 10.20.92.1
AdminTimeout 30
InactivityTimeout 0
LocalLogEnabled True
RemoteLogEnabled False
RemoteLogHostAddress 10.0.0.254
NTPClientEnabled False
NTPServerAddress 10.0.0.254
EmbeddedGUIEnabled True
See also Set Setup command , page 172