HP M-series HA-Fabric Manager Software - Manual (Page 162)

162 Command Line Interface
threshold
Initiates a configuration session by which to generate and log alarms for selected events. The
system displays each event, its triggers, and sampling window one line at a time and prompts
you for a value. For each parameter, enter a new value or press
Enter to accept the current value
shown in brackets. These parameters must be saved in a configuration and activated before they
will take effect. See the Config command
for information about saving and activating a
configuration. Table 47 describes the Set Config Threshold parameters. The switch will down a
port if an alarm condition is not cleared within three consecutive sampling windows (by default
30 seconds). Reset the port to bring it back online. An alarm is cleared when the threshold
monitoring detects that the error rate has fallen below the falling trigger.
Table 47
Set Config threshold parameters
Parameter Description
Threshold Monitoring Enabled Master enable/disable parameter for all events. Enables (True)
or disables (False) the generation of all enabled event alarms.
The default is False.
CRCErrorsMonitoringEnabled
DecodeErrorsMonitoringEnabled
ISLMonitoringEnabled
LoginMonitoringEnabled
LogoutMonitoringEnabled
LOSMonitoringEnabled The event type enable/disable parameter. Enables (True) or
disables (False) the generation of alarms for each of the
following events:
•
CRC errors
• Decode errors
• ISL connection count
•
Device login errors
• Device logout errors
• Loss-of-signal errors
Rising Trigger The event count above which a rising trigger alarm is logged.
The switch will not generate another rising trigger alarm for
that event until the count descends below the falling trigger
and again exceeds the rising trigger.
Falling Trigger The event count below which a falling trigger alarm is logged.
The switch will not generate another falling trigger alarm for
that event until the count exceeds the rising trigger and
descends again below the falling trigger.
Sample Window The period of time in seconds in which to count events