HP M-series HA-Fabric Manager Software - Manual (Page 127)

McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 127
Feature command
Description Adds Product Feature Enablement (PFE) key features to the switch and displays the PFE key log. A
Product Feature Enablement (PFE) key is a password that you can purchase from your switch
distributor or authorized reseller to enable particular features in your switch. To obtain the McDATA
4Gb SAN Switch serial number and Product Feature Enablement license key, follow the step-by-step
instructions on the "firmware feature entitlement request certificate" for the PFE key. One of the
license key retrieval options is via the web:
www.webkey.external.hp.com .
Authority Admin session for Add operand only
Syntax
feature
add [pfe_key]
log
Operands
add [pfe_key]
Adds the feature that corresponds to the value given by [pfe_key]. [pfe_key] is case insensitive.
log
Displays a list of installed PFE key features.
Notes The following PFE keys are available
•
The SANtegrity Enhanced® PFE key enables device security on the switch. Device security
commands include the following:
•
Group command , page 129
• Security command , page 151
• Securityset command , page 154
• Set Config command , page 158
• The Element Manger PFE key enables McDATA Element Manager for use through HAFM.
If the PFE key instructions indicate that the procedure is disruptive, isolate the switch from the fabric
before installing the PFE key.