HP M-series HA-Fabric Manager Software - Manual (Page 147)

McDATA® 4Gb SAN Switch for HP p-Class BladeSystem user guide 147
Enter the Show Config Switch command to display switch configuration values.
Enter the Show Config Port command to display port configuration values.
system
Resets the system configuration settings to the factory default values. See Table 42 for system
configuration default values.
zoning
Clears the zoning database and deactivates the active zone set. The zoning configuration values
(InteropAutosave, DefaultZone) remain unchanged.
Notes The following tables specify the various factory default settings.
Table 35 Switch configuration defaults
Parameter Default
Admin State Online
Broadcast Enabled True
InbandEnabled True
FDMIEnabled True
FDMIEntries 1000
DefaultDomain ID 1 (0x Hex)
Domain ID Lock False
Symbolic Name McDATA4GbSAN
R_A_TOV 10000
E_D_TOV 2000
Principal Priority 254
Configuration Description Default Config
InteropMode Standard
Table 36 Port configuration defaults
Parameter Default
Admin State Online
Link Speed Internal ports: 2-Gbps
External ports: Auto
Port Type Internal ports: FL
External ports: GL
Symbolic Name Port n, where n is the port number
ALFairness False
DeviceScanEnabled True
ForceOfflineRSCN False
ARB_FF False
InteropCredit 0
FANEnable True