HP M-series HA-Fabric Manager Software - Manual (Page 100)

100 Managing ports
Port Statistics data window
The Port Statistics data window displays statistics about port performance. Select one or more ports in the
faceplate display that you want to view statistics. Click the
Port Stats data window tab to open the Port
Statistics window. Table 22 describes the Port Statistics data window entries.
The
Statistics drop-down list is available on the Port Statistics data window, and provides different ways to
view detailed port information. Click the down arrow to open the drop-down list. Open the drop-down list
and select
Absolute to view the total count of statistics since the last switch or port reset. Select Rate to view
the number of statistics counted per second over the polling period. Select Baseline to view the total count
of statistics since the last time the baseline was set. Click
Clear Baseline to set the current baseline when
viewing baseline statistics. The baseline will also be set when the switch status changes from unreachable
to reachable.
Table 22 Port Statistics data window entries
Entry Description
Start Time The beginning of the period over which the statistics apply. The
start time for the Absolute view is not applicable. The start time
for the Rate view is the beginning of polling interval. The start
time for the Baseline view is the last time the baseline was set.
End Time The last time the statistics were updated on the display
Total Time Total time period from start time to end time
Al Init Number of times the port entered the initialization state
AL Init Error Number of times the port entered initialization and the
initialization failed. Increments count when port has a sync loss
Bad Frames Number of frames that were truncated due to a loss of sync or
the frame didn't end with an EOF
Class 2 Frames In Number of class 2 frames received by this port
Class 2 Frames Out Number of class 2 frames transmitted by this port
Class 2 Words In Number of class 2 words received by this port
Class 2 Words Out Number of class 2 words transmitted by this port
Class 3 Frames In Number of class 3 frames received by this port
Class 3 Frames Out Number of class 3 frames transmitted by this port
Class 3 Toss Number of class 3 frames that were discarded by this port. A
frame can be discarded because of detection of a missing frame
(based on SEQ_CNT), detection of an E_D_TOV timeout,
receiving a reject frame, or receiving a frame on an offline port.
Class 3 Words In Number of class 3 words received by this port
Class 3 Words Out Number of class 3 words transmitted by this port
Decode Errors Number of invalid transmission words detected during decoding.
Decoding is from the 10-bit characters and special K characters.
Ep Connects Number of E_Port logins
FBusy Number of class 2 and class 3 fabric busy (F_BSY) frames
generated by this port in response to incoming frames. This
usually indicates a busy condition on the fabric or N_port that is
preventing delivery of this frame.