Brother PE-DESIGN Ver.6 - Manual (Page 96)

88
Design Center
Stage 4 (Sew Setting Stage)
On: The Region color button and the Region
sew type selector are displayed.
Off: The Region color button and the Region
sew type selector are not displayed.
2.
Click a region to apply the region sewing
attributes.
→ If the Region sew button has been
switched on, the color displayed in the
Region color button and the sew type
displayed in the Region sew type selec-
tor are applied to the region.
→ If the Region sew button has been
switched off, the color and sew type for
the region disappear.
c
“Color” on page 89 and “Sew type” on
page 89
■
Line sew
Clicking this button switches on/off sewing for a line.
b
Memo:
• The Line sew button is available only
when or on the Tool Box is
selected.
• When line sewing is switched off, the line
is not sewn (and you cannot set its color or
sew type).
1. Click .
This button has two settings:
On: The Line color button and the Line sew
type selector are displayed.
Off: The Line color button and the Line sew
type selector are not displayed.
2. Click a line to apply the line sewing attributes.
→ If the Line sew button has been switched
on, the color displayed on the Line color
button and the sew type displayed in the
Line sew type selector are applied to the
line.
→ If the Line sew button has been switched
off, the line is replaced with a dotted line
and will not be sewn.
c
“Color” on page 89 and “Sew type” on
page 89
Region sew
Region color
Region sew type
a
Note:
The color cannot be set separately for a
portion of the outline. If you change the
color, the new color will be applied to the
entire outline.
Line sew
Line color
Line sew type
PeDesignV6Eng.book Page 88 Thursday, July 8, 2004 11:59 AM