Brother PE-DESIGN Ver.6 - Manual (Page 60)

52
Creating and Editing Embroidery Patterns
3.
Click Display on the menu bar, and then click
Realistic Preview.
An alternate method is to click the Toolbar
button indicated below.
→ A realistic preview of the embroidery pat-
tern appears.
b
Memo:
To zoom in (or out), click on the Tool
Box, click (or ), and then click the
desired area of the embroidery pattern.
4. To return to the previous display, repeat step
3.
, or press the key.
Step 13
Transferring the pattern to an
original card
Before you can actually sew the embroidery
pattern, you must transfer the pattern to a sewing
machine. Transfer the embroidery pattern to the
sewing machine using media of the type used by
your machine, for example, original cards, floppy
disks, CompactFlash cards, or USB media. For
this example, we will transfer the pattern to an
original card.
1.
Insert an original card into the USB card writer
module.
2. Click File on the menu bar, point to Write to
Card, and then click Current Design on the
submenu.
An alternate method is to click the Toolbar
button indicated below.
→ The following message appears.
3. Click OK.
→ The following message appears.
a
Note:
The embroidery pattern cannot be edited
while the realistic preview is displayed.
Realistic Preview
Esc
a
Note:
The original card is inserted correctly when
you hear it snap into place.
a
Note:
If the original card is not brand new, make
sure that the patterns already stored on the
card are no longer needed.
Write to Card
PeDesignV6Eng.book Page 52 Thursday, July 8, 2004 11:59 AM