Operation – KROHNE MFC 400 EN User Manual
Page 86
6
OPERATION
86
MFC 400
www.krohne.com
08/2013 - 4002075802 - MA MFC 400 R02 en
C6.7.4
Mass Flow
kg/s; kg/min; kg/h; t/min; t/h; g/s; g/min; g/h;
lb/s; lb/min; lb/h; ST/min; ST/h (ST = Short Ton); LT/h (LT = Long Ton);
Free Unit (set factor and text in the next two functions, sequence see below)
C6.7.5
Text Free Unit
For text to be specified refer to
Set free units on page 87:
C6.7.6
[kg/s]*Factor
Specification of the conversion factor, based on kg/s:
xxx.xxx refer to
Set free units on page 87
C6.7.7
Velocity
m/s; ft/s
C6.7.9
Temperature
°
C; °F; K
C6.7.10
Volume
m³; L; hL; mL; gal; IG; in³; cf; yd³; barrel
Free Unit (set factor and text in the next two functions, sequence see below)
C6.7.11
Text Free Unit
For text to be specified refer to
Set free units on page 87:
C6.7.12
[m³]*Factor
Specification of the conversion factor, based on m³:
xxx.xxx refer to
Set free units on page 87
C6.7.13
Mass
kg; t; mg; g; lb; ST; LT; oz;
Free Unit (set factor and text in the next two functions, sequence see below)
C6.7.14
Text Free Unit
For text to be specified refer to
Set free units on page 87:
C6.7.15
[kg]*Factor
Specification of the conversion factor, based on kg:
xxx.xxx refer to
Set free units on page 87
C6.7.16
Density
kg/L; kg/m³; lb/cf; lb/gal; SG
Free Unit (set factor and text in the next two functions, sequence see below)
C6.7.17
Text Free Unit
For text to be specified refer to
Set free units on page 87:
C6.7.18
[kg/m³]*Factor
Specification of the conversion factor, based on kg/m³:
xxx.xxx refer to
Set free units on page 87
C6.7.19
Pressure
Pa; kPa; bar; mbar; psi (no free units possible);
only if current input available
No.
Function
Settings / descriptions
.book Page 86 Monday, August 26, 2013 9:05 AM