KROHNE MFC 400 EN - Manual (Page 15)

DEVICE DESCRIPTION
2
15
MFC 400
www.krohne.com 08/2013 - 4002075802 - MA MFC 400 R02 en
2.3.2 Electrical connection data of inputs/outputs (example of basic version)
• A = active mode; the signal converter supplies the power for connection of the subsequent
devices
• P = passive mode; external power supply required for operation of the subsequent devices
• N/C = connection terminals not connected
Figure 2-5: Example of a nameplate for electrical connection data of inputs and outputs
1 Power supply (AC: L and N; DC: L+ and L-; PE for ≥ 24 VAC; FE for ≤ 24 VAC and DC)
2 Connection data of connection terminal D/D-
3 Connection data of connection terminal C/C-
4 Connection data of connection terminal B/B-
5 Connection data of connection terminal A/A-; A+ only operable in the basic version
.book Page 15 Monday, August 26, 2013 9:05 AM