KROHNE MFC 400 EN - Manual (Page 101)

OPERATION
6
101
MFC 400
www.krohne.com 08/2013 - 4002075802 - MA MFC 400 R02 en
6.5.13 Diagnosis messages (menu C1.5.7....C1.5.14)
These settings make it possible to change the status signal of the respective diagnosis message
(status group).
6.5.14 Optical keys (C6.2.4)
This function can deactivate the optical keys. In the display, the switched off state of the optical
keys is represented by a lock 1.
In this case, the device may only be operated using the push buttons.
6.5.15 Graphic page (menu C6.5)
With this converter, the trend of the main measurement can be graphically displayed. The first
measurement on display page 1 is always defined as the main measurement.
• Menu C6.5.1 defines the range for the trend indicator (manual or automatic).
• Menu C6.5.2 defines the range for manual setting.
• Menu C6.5.3 defines the time span for the trend indicator.
6.5.16 Save settings (menu C6.6.2)
This function allows all settings to be stored in a memory.
• Backup 1: Saves settings in backup memory area 1
• Backup 2: Saves settings in backup memory area 2
6.5.17 Load settings (menu C6.6.3)
This function allows the complete stored settings to be loaded again.
• Backup 1: Loading from backup - memory 1
• Backup 2: Loading from backup - memory 2
• Factory: Uploading the original factory settings
.book Page 101 Monday, August 26, 2013 9:05 AM