beautypg.com

Device description – KROHNE MFC 400 EN User Manual

Page 13

background image

DEVICE DESCRIPTION

2

13

MFC 400

www.krohne.com

08/2013 - 4002075802 - MA MFC 400 R02 en

2.2.1 Field housing

Figure 2-3: Construction of the field housing

1 Cover for electronics and display
2 Cover for power supply and inputs/outputs terminal compartment
3 Cover for measuring sensor terminal compartment
4 Cable entry for measuring sensor signal cable
5 Cable entry for measuring sensor field current cable
6 Cable entry for power supply
7 Cable entry for inputs and outputs
8 Mounting plate for pipe and wall mounting

INFORMATION!
Each time a housing cover is opened, the thread should be cleaned and greased. Use only resin-
free and acid-free grease.
Ensure that the housing gasket is properly fitted, clean and undamaged.

.book Page 13 Monday, August 26, 2013 9:05 AM