KROHNE MFC 400 EN - Manual (Page 61)

OPERATION
6
61
MFC 400
www.krohne.com 08/2013 - 4002075802 - MA MFC 400 R02 en
6.1.3 Display when setting parameters, 4 lines
6.1.4 Display when previewing parameters, 4 lines
Figure 6-4: Display when setting parameters, 4 lines
1 Current menu, submenu or function
2 Number relating to 7
3 Denotes factory setting
4 Denotes permissible value range
5 Permissible value range for numeric values
6 Currently set value, unit or function (when selected, appears with white text, blue background)
This is where the data is changed.
7 Current parameter
8 Factory setting of parameter
Figure 6-5: Display when previewing parameters, 4 lines
1 Current menu, submenu or function
2 Number relating to 6
3 Denotes a changed parameter (simple check of changed data when browsing through lists)
4 Next parameter
5 Currently set data from 6
6 Current parameter (for selection press key >; then see previous chapter)
7 Factory setting of parameter
.book Page 61 Monday, August 26, 2013 9:05 AM