GW Instek GDS-2000 series Uer manual - Manual (Page 59)

MEASUREMENT
59
Display All mode
Display All mode shows and updates all items from Voltage and
Time type measurement.
View
measurement
result 1. Press the Measure key
twice.
Measure
Measure
2. Press the channel for which
the measurement results
need to be observed.
CH1 F 1
3. The results of Voltage and Time type
measurement appear on the display.
4. Press F5 (OFF) to clear the
measurement results from
the display.
OFF F 5
Delay type Delay type measurement is not available in this
mode. Use the Individual measurement mode
(page57) instead.