GW Instek GDS-2000 series Uer manual - Manual (Page 17)

GETTING STARTED
17
Vertical position
knob Sets the vertical position of
waveforms (page102).
Channel menu
key Configures the vertical scale and
coupling mode for each channel
(page102).
Volts/Div knob Selects the vertical scale (page102).
Input terminal Accepts input signals. Input
impedance: 1MΩ±2%.
Ground terminal Accepts the DUT ground lead for
common ground.
Math key Configures and runs math
operation (page64).
USB host port TypeA, 1.1/2.0 compatible. Prints
out display image (page146) or
transfers data (page119).
Menu On/Off key Shows or hides menu in the LCD
display (page94).
Probe
compensation
output Outputs 2Vp-p, square signal for
probe compensation (page159) or
demonstration. Can be used for
generic purpose (page53) as well.
External trigger
input EXT TRIG For 2ch model only. Accepts
external trigger signal (page106).
Input impedance: 1MΩ±2%.