beautypg.com

Basic measurement, Channel activation – GW Instek GDS-2000 series Uer manual User Manual

Page 48

background image

GDS-2000 Series User Manual

48

Basic Measurement

This section describes the basic operations required in capturing
and viewing the input signal. For more detailed operations, see the
following chapters.

Measurements → from page47

Configurations → from page83

Channel activation

Activate channel

To activate an input channel,
press the Channel key. The
LED turns On and the input
signal waveform appears on
the display.

De-activate
channel

To disable the channel, press
the Channel key again. If the
display menu is different from
the Channel menu, press twice
(the first press shows the
Channel menu).

Default setup

When the default setup is recalled (Save/Recall
key → F1), Channel 1 automatically turns On.
Channel 2, 3, and 4 becomes Off.

Auto Set

The Auto Set (page49) does NOT automatically
activate the channels to which input signals are
connected.