GW Instek GDS-2000 series Uer manual - Manual (Page 143)

SAVE/RECALL
143
5. Press F2 (Source) repeatedly
to select the file source,
internal memory or external
USB. Use the Variable knob
to change the memory
location (S1 ~ S20) or the file
name (DSxxxx.csv).
Source F 2
Memory Internal memory, W1 ~ W20
USB External flash drive, no
practical limitation on the
amount of file. The waveform
file must be placed in the root
directory to be recognized.
6. Press F3 (Destination). Use
the Variable knob to select
the memory location.
Destination
USB
F 3
RefA ~ D Internally stored reference
waveforms A ~ D
7. Press F4 (Save) to confirm
recalling. When completed,
a message appears at the
bottom of the display.
Recall F 4
Note
The file will not be saved if the
power is turned Off or USB drive is
taken out before the message.
USB file utility To edit USB flash drive
contents (create/ delete/
rename files and folders), press
F5. For details, see page123.
File
Utilities
F 5