GW Instek GDS-2000 series Uer manual - Manual (Page 51)

MEASUREMENT
51
Horizontal position/scale
For more detailed configuration, see page95.
Set horizontal
position The horizontal position knob
moves the waveform left/right.
As the waveform moves, the
memory bar appears on the top
of the display, indicating the
portion of displayed waveform
in the memory.
Stop mode In the Stop mode, the memory bar
moves along with the waveform until
it reaches the end of the memory.
Select horizontal
scale To select the timebase (scale),
turn the TIME/DIV knob; left
(slow) or right (fast).
Range 1ns/Div ~ 10s/Div, 1-2-5 increment
The corresponding sampling rate appears on the
upper side of the display. The timebase indicator
appears on the lower side.
Stop mode In the Stop mode, the memory bar
and waveform size changes
according to the scale.