GW Instek GDS-1000-U Series User Manual - Manual (Page 68)

GDS-1000-U Series User Manual
68
4. Press Go-NoGo. The test
starts and stops according to
the conditions set on page
62, 63. To stop the test that
has already started, press
Go-NoGo again.
Go-NoGo
On
5. The test results appear in
the Ratio soft-key. The
numerator denotes the total
number of failed tests. The
denominator denotes the
total number of tests.
Ratio:
2 BMP
9 BMP
Numerator Number of “failed“ tests.
Denominator Total number of tests.
Data Logging
Overview
Background The Data logging function allows you to log data
or a screen image over timed intervals for up to
100 hours to a USB flash drive.
The data or images are stored to a USB flash drive
in a directory named LogXXXX. LogXXXX is
incremented each time the data logging function is
used.
The files saved in the LogXXXX directory are
named DSXXXX.CSV, or DSXXXX.BMP for data or
image files, respectively. At each timed interval
data or an image file is saved and the file number
incremented. For example, DS0000 is the first
logged data, DS0001 is the second and so on.