GW Instek GDS-1000-U Series User Manual - Manual (Page 56)

GDS-1000-U Series User Manual
56
To move the right cursor, press
X2 and then use the Variable
knob.
X2
22.9us
0.000V
To move both cursors at once,
press X1X2 and then use the
Variable knob.
X 1 X 2
2 3 . 6 u s
1 1 . 9 H z
2 1 2 . 0 m V
Remove cursors Press Cursor to remove the
onscreen cursors. Cursor
Using the vertical cursors
Procedure 1. Press the Cursor key. Cursor
2. Press X↔Y to select the
vertical (Y1&Y2) cursor. X
↔Y
3. Press Source repeatedly to
select the source channel.
Source
CH1
Range CH1, 2, MATH
4. The cursor measurement results will appear in
the menu.
Parameters Y1 Voltage level of the upper cursor
Y2 Voltage level of the lower cursor
Y1Y2 The difference between the upper and
lower cursor
Moving the
vertical cursors To move the upper cursor,
press Y1 and then use the
Variable knob.
Y1
123.4mV
To move the lower cursor,
press Y2 and then use the
Variable knob.
Y2
12.9mV