GW Instek GDS-1000-U Series User Manual - Manual (Page 48)

GDS-1000-U Series User Manual
48
Trigger Run mode Trigger Stop mode
Stop icon
Auto or
Trig icon
Waveform
operation Waveforms can be moved or scaled in both the
Run and Stop mode. For details, see page 78
(Horizontal position/scale) and page 82 (Vertical
position/scale).
Changing the horizontal position and scale
For more detailed configurations, see page 78.
Setting the
horizontal
position The horizontal position knob
moves the waveform left or right.
The position indicator moves along with the
waveform and the distance from the center point is
displayed as the offset in the upper side of the
display.
Horizontal offset
Position indicator