GW Instek GDS-1000-U Series User Manual - Manual (Page 104)

GDS-1000-U Series User Manual
104
Saving the panel settings
Procedure 1. (For saving to USB flash
drive) Insert the USB flash
drive into the front panel
USB port.
2. Press the Save/Recall key
twice to access the Save
menu.
Save/Recall Save/Recall
3. Press Save Setup.
Save
Setup
4. Press Destination repeatedly
to select the saved location.
Use the Variable knob to
change the internal memory
location (S1 ~ S15).
Destination
Memory
VARIABLE
Memory Internal memory, S1 ~ S15
USB USB, no practical limitation for the
amount of files. When saved, the
setup file will be placed in the root
directory.
5. Press Save to confirm
saving. When completed, a
message appears at the
bottom of the display. Save
Note
The file will not be saved if the
power is turned off or the USB flash
drive is removed before completion.