GW Instek GDS-1000-U Series User Manual - Manual (Page 119)

FAQ
119
F
AQ
• The input signal does not appear in the display.
• I want to remove some contents from the display.
• The waveform does not update (frozen).
• The probe waveform is distorted.
• Autoset does not catch the signal well.
• Autoset function cannot catch signals under 30mV or 30Hz.
Please use the manual operation. See page46 for details.
I want to clean up the cluttered panel settings.
• The accuracy does not match the specifications.
The input signal does not appear in the display.
Make sure you have activated the channel by pressing the CH key
(page 45).
I want to remove some contents from the display.
To clear the math result, press the Math key again (page58).
To clear the cursor, press the Cursor key again (page 55).
To clear the Help contents, press the Help key again (page 44).