GW Instek GDS-1000-U Series User Manual - Manual (Page 20)

GDS-1000-U Series User Manual
20
Display
Waveform marker
Vertical status Horizontal status Frequency Trigger condition
Waveform position Trigger status Acquisition
Menu
Waveforms Channel 1: Yellow Channel 2: Blue
Trigger status Trig’d A signal is being triggered
Trig? Waiting for a trigger condition
Auto Updating the input signal
regardless of trigger conditions
STOP Triggering is stopped
For trigger setting details, see page 84.
Input signal
frequency Updates the input signal frequency (the trigger
source signal) in real-time.
“< 2Hz” Indicates that the signal frequency is less
than the lower frequency limit (2Hz) and thus not
accurate.
Trigger
configuration Shows the trigger source, type, and slope. In case
of the Video trigger, shows the trigger source and
polarity.
Horizontal status
Vertical status Shows the channel configurations: coupling mode,
vertical scale, and horizontal scale.