Spectra Precision Survey Pro v4.5 Ranger User Manual - Manual (Page 252)

User’s Manual – GPS Mode
242
Note: If you have post processing data collection turned on, the
receiver will now open a file (with the next available default name),
start recording GPS raw data, and record the station and antenna
information for this static session.
Start GPS Survey – Rover Setup
The Start GPS Survey Rover Setup screen is used to setup an RTK
rover receiver, and to configure or check the base point reference
position in Survey Pro. Before proceeding to the Rover Setup screen,
you will be prompted to connect to an RTK rover or an NTRIP rover
receiver. Connecting to a rover receiver uses the same screen used for
the base receiver, described above on Page 239. If you select an RTK
rover receiver, you will proceed directly to the Rover Setup screen. If
you choose an NTRIP rover, you will first be prompted to choose an
NTRIP service before you proceed to the Rover Setup screen
Rover Setup – Select NTRIP Service
1. Select a service from the Select an NTRIP
service
list box.
2. If this service requires a user name and/or
password, enter these values in the User
Name
and/or Password edit fields.
3. If you wish to persist this user name and/or
password, check the Save User Name and
Password
box.
4. Tap Connect> to log onto the RTK network
server and use the selected service.