Spectra Precision Survey Pro v4.5 Ranger User Manual - Manual (Page 188)

User’s Manual – Leveling Mode
178
Turn to Turning Point (Leveling Shots)
7. When shooting a turning point, you
will immediately be prompted for the
necessary shots for all sets in the
sequence selected in the Level Settings
screen (Page 173). This screen is also
used when performing the actual shots
for all the other types of shots that can
be selected from the Level screen.
The top line of this screen is saying
that your backsight point for this setup
is the first turning point that you shot
for this loop (TP1), which indicates this
is your second setup. If your backsight were a known point
that was stored in the current job, the point name would be
displayed here.
The box on the second line tells you which shot to take next.
The term B1 means to shoot the backsight for Set 1. If the
box showed F3, it would mean to shoot the foresight for Set 3,
and so on.
8. Tap the Take Shot button to take the shot.
When shooting in Manual Mode, you will be prompted to
enter the shot data manually. The type of information
required depends on which leveling method was chosen in the
Level Method screen as described on Page 174. Each prompt
is shown below.