Spectra Precision Survey Pro v4.5 Ranger User Manual - Manual (Page 166)

User’s Manual – Conventional Mode
156
Setup Your Staking Options
9. Enter the first station that you want to
stake in the Station to Stake field.
10. Enter the desired spacing between the
staked stations in the Station Interval field.
11. In the Offset field, select L if you wish to
stake an offset on the left side of the curve,
or select R if you wish to stake an offset
on the right side and enter the desired
offset here. (If you are not staking an
offset, enter an offset of zero.)
12. Tap the V.Offset / Grade button if you want to account for a
vertical offset or percent grade for the staked points and enter the
appropriate valued in the same field. When specifying a vertical
offset, you must also select the D or U radio button to indicate
if the specified offset is downward or upward from the design
point, respectively.
13. Enter the current rod height in the Height of Rod field and tap
Solve>.