Spectra Precision Survey Pro v4.5 Ranger Reference Manual - Manual (Page 90)

Survey Pro Reference Manual
R-82
Choose Polyline
Job View DTM Boundary… .
The Choose Polyline screen is used to select an
existing polyline that defines a boundary for
your non-reference DTM surface.
All the polylines in the current job are
displayed. Select the appropriate polyline and
tap .
Add/Edit Break-lines
Job View DTM Breaklines… .
The Add/Edit Break-lines screen is used to
select, edit, create, or delete the break-lines
that will be used when computing the DTM.
The break-lines that will be used when
computing the DTM are listed in this screen.
Edit… : opens the Edit Polyline screen where
the selected polyline can be modified or a new
polyline can be created.
Delete… : will move the selected polyline to
the Auxiliary layer.
Add Existing… : will display all the polylines in the current job.
Selecting a polyline and tapping will move the selected polyline to
the DTM layer.
Note: If a boundary is defined, only polylines that fall within the
boundary can be added.
New… : opens the New Polyline screen, which is identical to the Edit
Polyline screen and is used to create a new polyline.