Spectra Precision Survey Pro v4.5 Ranger Reference Manual - Manual (Page 262)

Survey Pro Reference Manual
R-254
Feature : opens the Feature Collection screen (Page R-191), where
various automatic and manual data collection options are available.
Offset : opens the Offset Shots screen (Page R-193), where a point
can be collected and stored at a specified offset.
Point : opens the Occupy Data Points screen (Page R-194), used to
occupy and store a new point.
Traverse Base
Survey Data Collection Traverse… .
The Traverse Base routine provides an easy
method to collect a point and then move your
base to that point, or to move your base to any
existing point in the current job.
Traverse Base > : This prompts you to move
your base to another existing job point and
then starts the Start GPS Survey wizard,
described on Page R-246.
Occupy then Traverse > : Opens the Occupy
Data Points screen (Page R-194) and allows
you to first occupy a new point and then move
the base to that point before starting the Start GPS Survey wizard,
described on Page R-246.
Control Points
Survey Control Points . or
Data Collection Control .
The Control Points screen is used to measure GPS control points to
use in the localization adjustment, or to check the location of exiting
points against GPS measurements and the latest coordinate system.
This screen is described on Page R-195.