Spectra Precision Survey Pro v4.5 Ranger Reference Manual - Manual (Page 44)

Survey Pro Reference Manual
R-36
Settings
Job Settings .
See Page R-94 if running in GPS mode.
The Settings screen actually consists of several separate screens
where each individual screen contains different types of settings.
There are two ways to navigate to the various screens. The first
method is to tap the button to drop down the list of available
screens and then tap on the desired screen from the list to open it.
An alternate method is to tap the buttons to the side of the screen
title, which will open the previous or next screen respectively.
Repeatedly tapping either of these buttons will cycle through all the
available screens.
Instrument Settings
Job Settings Instrument Settings .
The Instrument Settings screen is actually the
first of multiple screens used to identify and
configure the instrument(s) you are using with
Survey Pro. The correct settings must be
configured for successful communications
between the data collector and the instrument.
The upper portion of the first Instrument
Settings screen lists the names of all the
instrument profiles on the data collector. The
other columns list the COM Port, Brand, and
Model of the instrument defined in each profile.
Manual Mode: is a special profile that cannot be deleted. When
activated, all surveying is performed without being connected to an
instrument and all shot data must be entered manually.