Spectra Precision Survey Pro v4.5 Ranger Reference Manual - Manual (Page 89)

Job Menu
R-81
Breaklines… : will open the Add/Edit Break-lines screen where DTM
break-lines can be added or edited.
Points… : will open the Points on DTM Layer screen where the points
on the DTM layer can be viewed, new points can be imported, and
existing points can be deleted (moved to the Auxiliary layer).
3D View… : will open the 3D View screen where the DTM can be
viewed from any angle.
Layers for Staking DTM
Job View DTM Layers… .
The Layers for Staking DTM screen is used to
select the non-reference DTM layer and an
optional layer where invalid objects are stored.
Select DTM Layer: is the non-reference DTM
layer used for stake points that are stored and
other objects that exist on the surface you are
staking. These points will be used to generate a
DTM surface to compare to the reference DTM
surface.
Select Auxiliary Layer: if this is checked and a
point is stored that is located outside the
selected DTM boundary, the point is automatically stored on the
Auxiliary layer. If left unchecked, a prompt will appear when storing
a point outside the boundary where you must specify the layer to
store the new point.
Layer (Auxiliary): is the layer that all points will be stored to if they
cannot be stored to the DTM layer.