Spectra Precision Survey Pro v4.5 Ranger Reference Manual - Manual (Page 200)

Survey Pro Reference Manual
R-192
• Manual: prompt once: stores points in the same way as
tapping Topo SS from the Data Collection screen,
incrementing the point name after each stored point.
• Manual: prompt every point: performs the same function as
the Manual Prompt Once routine, above, except you are
prompted for a new description, layer, and attribute with each
point stored.
Interval
: is where you enter the interval criteria used for continuous
collection modes. The Interval field is not available if either of the
manual methods is selected.
Update Rate
: is where you set the receiver to One Hz or Five Hz mode.
When Five Hz is selected, the receiver will compute positions five
times a second so the display will update in near real time and
measurement latency will be minimized.
Start : opens the Occupy Data Points screen (Page R-194), where
data can be collected.
Note: If you hotkey to another screen while using the Feature
Collection routine, the Feature Collection screen will be suspended
until you return to it.