Spectra Precision Survey Pro v4.5 Ranger Reference Manual - Manual (Page 210)

Survey Pro Reference Manual
R-202
Static / RTK Rover Receiver Session
Survey Data Collection -or-
Survey Post Processing
Start Recording . -or-
Survey Control Points Post Process -or-
Survey Data Collection Post Process .
The Receiver Session screen is used to enter the station information
and antenna height for a post processing data collection session.
Store point in
: is used to select how to store this session. You will
always get a session recorded in the post processing log file. Select
Receiver and job file
to store a point record in the Survey Pro .JOB file
as well. By default, post processing points will go on the layer
selected on the Job | Settings | Post Process screen.
Note: If you are using this screen with the RTK rover, you can only
store points in the post processing log file from this screen. Use the
RTK Data Collection screen to store points in Survey Pro
simultaneously with points logged to the post processing file.
Point (or) Site ID
: is where you enter the station name for the static
session or stop and go point.
During timed stop and go session Starting a Static Session