Spectra Precision Survey Pro v4.5 Ranger Reference Manual - Manual (Page 116)

Survey Pro Reference Manual
R-108
• Do not store: this option will prohibit
acceptance of autonomous points in
RTK data collection routines.
• Prompt for layer: this option will
prompt the user whenever an
autonomous point is accepted. The
layer specified will be the default layer
to store autonomous points, but the
user can over ride at the prompt.
• Store on selected layer: this option
will automatically store autonomous
points accepted during RTK data collection routines on the
specified layer.
Layer
: displays the layer selected to store autonomous points.
Select Layer : opens up a layer prompt to allow you to select an
existing layer or create a new layer to store autonomous points.
Session Monitor
: is where you select to use the session monitoring
thresholds when collecting data with the Static / Rover Session
screen. To have Survey Pro display warnings during post processing
data collection, check Warn me if, and specify threshold values for the
number of SV, HDOP and memory.