Spectra Precision Survey Pro v4.5 Ranger Reference Manual - Manual (Page 226)

Survey Pro Reference Manual
R-218
Projection – Mapping Plane Mode
The Projection screen is described below for when the horizontal
projection mode is set to Mapping Plane.
Use this setting when you want your
coordinate system to be a conformal map
projection chosen from the coordinate system
database file.
See Page R-206 for when the projection mode is
set to TDS Localization.
Status Line
: The text at the top of the screen
describes the status of the horizontal projection
solution.
Show Details… : opens the Projection Details
screen, where the complete details of the
localization solution, reference map projection, and Geoid model are
displayed.
Select Zone… : opens the Select Coordinate System screen (Page R-
226), where you can choose a zone or site from the data base, key in a
custom zone, and delete zones or sites from the database.
Mapping Plane Ground… : opens the Ground Coordinates screen (Page
R-226), where the grid to ground conversion parameters can be
calculated and applied.
Solve Localization… : opens the Solve Localization wizard (Page R-
210), where control points can be selected and the horizontal and
vertical localization are solved.
Switch to TDS Localization… : switches the horizontal projection mode
from Mapping Plane mode to Ground TDS Localization mode (Page
R-206).