Spectra Precision Survey Pro v4.5 Ranger Reference Manual - Manual (Page 360)

Survey Pro Reference Manual
R-352
North: is the Y-coordinate on the specified line, tangent to the
perpendicular offset.
East: is the X-coordinate on the specified line, tangent to the
perpendicular offset.
Elevation: is the elevation on the specified line, tangent to the
perpendicular offset.
Inverse Point to Polyline
Inverse Point to Polyline .
The Inverse Point to Polyline screen computes the offset distance
from a known point perpendicular to a polyline.
Inverse Point: is the known point that the
offset to a polyline segment is computed.
Begin Station: is the starting station assigned
to the beginning of the polyline, which is used
to compute the Station in the results.
Tap Polyline : allows you to tap an existing
polyline from a map view.
Editor : opens the Polyline Editor (Page R-65)
where a new polyline can be created or an
existing polyline can be modified.
Tap Points : provides a map view where you can tap any existing
points to create a temporary polyline.
To/From : Opens the Point List screen (Page R-443) where a point
list can be created.
; Store Point : When checked, will store the first solution where a
perpendicular offset intersects with a polyline using the specified
point name. If additional solutions are found, the following solutions
will be stored using consecutive point names.