Spectra Precision Survey Pro v4.5 Ranger Reference Manual - Manual (Page 376)

Survey Pro Reference Manual
R-368
Error dist.: is the distance between the last point and the first point.
Error azm: is the direction from the last point to the first point
Precision: is the ratio between the Error distance and Perimeter.
Add / Edit Line
The Add / Edit Line screen is used to enter a new line to the list prior
to the selected line segment.
Azimuth / Bearing : is the direction of the
line.
Length: is the length of the line, in feet or
meters.
: enters the line to the list.
: closes the screen without entering any new
line data.
Add / Edit Curve
The Add / Edit Curve screen is used to enter a new curve to the list
prior to the selected line segment.
Radius : The distance from the radius point to
the curve
Delta : The internal angle from center to
tangent points
Degree Arc : The internal angle equivalent to
a 100-ft arc length
Degree Chord : The internal angle equivalent
to a 100-ft chord length
Length : The arc length
Chord : The chord length
Tangent : The distance from the PC or PT to the PI