Spectra Precision Survey Pro v4.5 Ranger Reference Manual - Manual (Page 25)

File Menu
R-17
Import *.CR5 Coordinates
When importing a CR5 file, you will first be prompted to select the
layer where you want the new data stored. Select a layer and tap
to continue.
In the next screen, select the distance units
that the coordinates were stored in and tap .
Import *.GPS Coordinates
When importing a GPS file, you will first be prompted to select the
layer where you want the new data stored. Select a layer and tap
to continue.
In the next screen, select the distance units
that the coordinates were stored in and tap .
When importing coordinates from both a TDS
CR5 and GPS file from the same job, the GPS
coordinate will be linked to the coordinates in
the CR5 file. For more information on this,
refer to the GPS User’s Guide.