Spectra Precision Survey Pro v4.5 Ranger Reference Manual - Manual (Page 206)

Survey Pro Reference Manual
R-198
Control Point
: is where you select if the current point is to be used for
Horizontal
control and/or Vertical control by tapping the appropriate
checkboxes.
Session Time
: displays the total occupation time so far for this
measurement.
Count Status
: displays Measuring when you have current coordinates
from the receiver and the screen is updating with the latest
measurement. If you are using Epoch Averaging, Averaging is
displayed after you tap Accept while the number of epochs is
averaged in Survey Pro. Suspended is displayed if you are not
receiving valid data from the receiver.
GPS Status : opens the GPS Status screen (Page R-172).
Accept : adds the measured GPS coordinates to the point record in
the job file, and returns to the Control Points screen.