Spectra Precision Survey Pro v4.5 Ranger Reference Manual - Manual (Page 427)

Roads Menu
R-419
Shot : takes a shot to the prism and computes come/go, cut/fill
information.
Shot data: displays the measurements from the last shot.
Store… : opens the next screen.
Store/Tape… : opens the Stake Out Point (Tape Offset) dialog box
(Page R-309), where the staked point can be stored that includes a
specified offset. The default value is the appropriate distance
correction to the design point.
Topo SS… : stores a side shot using the data from the last shot
taken. (This will not take a new shot.)
Turn Gun : (available with robotic total station) turns the total
station toward the design point.
< Back : returns to the second screen.
Stake Next > : returns you to the second Stake Road screen, without
storing a stake point, where the Design point is advanced by the
Increment value.
Stake Road – Screen Five
This screen is used to describe the stake point before it is stored and
select if the Results screen should be displayed
(described next).
Point: is the point name for the stake point
being stored.
Description: is the description for the stake
point being stored. The default description is
the station, side, and distance from the
centerline for the design point.
Show Results on OK: When this checkbox is
checked, a Results screen (described next) will
open after tapping from this screen.