Yokogawa 2-Wire Dual Channel Transmitter/Analyzer FLXA21 - Manual (Page 38)

<2. WIRING AND INSTALLATION>
2-11
IM 12A01A02-01E 5th Edition : Oct. 31, 2013-00
n ORP Measurement
The ORP measurement uses the same sensor input module as the pH measurement. It is not
uncommon to measure ORP as process variable and a pH Glass electrode as reference. This is
the case with rH measurement and with pH compensated ORP measurement.
Conventional ORP sensors are connected to the module as follows:
11 Temperature
12 Temperature
13 Reference
14 Solution ground
15 Metal (measure)
16 Shield
17 Shield
FLXA21
REF TC Liquid
Earth
ORP
For conventional ORP sensors, the jumpers are placed as illustrated:
16 15 19 17 13 18 14 12 11
PH
Input 1 Input 2
Metal sensor on Input 1.
Normal reference on Input 2.
pH Compensated ORP sensors are connected to the module as follows:
11 Temperature
12 Temperature
13 Glass
14 Solution ground
15 Metal
16 Shield
17 Shield
FLXA21
PH TC ORP Liquid
Earth
For pH Compensated ORP sensors, the jumper is placed as illustrated:
16 15 19 17 13 18 14 12 11
PH
Input 1 Input 2
Metal sensor on Input 1.
pH glass (as reference) on Input 2.
PH
SC
ISC
DO
SENCOM
2